Motion Detector

This EasyGo Technologies is an OEM of Motion Detector for Automatic Lighting Control System to our clients. This Automatic Switch is used for turning on and off the lights automatically by sensing motion. Our Motion Detectors are an integral part of any Lighting Control System being installed. For many external areas in Factories, Street Light Control or even perimeter lighting in shopping malls, the Photocell Switches play a pivotal role in energy conservation. They have a light dependent resistor which monitors the ambient lux threshold and turns on or off the connected public area lighting loads. Automatic Lighting Control System consist Dual Detector with motion sense and light Detector (LDR Detector) with Highly sensitive noise suppression PIR/Day sense. Switching of fixtures based on human motion and sensitivity and holding time can be adjusted. PIR Detector has detecting range Approx. 7 to 10 meter with detecting angle: 120 degrees Best suitable for washrooms, bathrooms, kitchen, main hall, passage, balcony, corridor, porch, reception, entrance lobby, garage, conference hall, staircase etc.

Features:

• Standalone type powered directly by mains supply 210~240 V AC 50Hz supply
• Easy Connectivity with just four wires
• Dual Detector with motion sense and light Detector (LDR Detector)
• Highly sensitive noise suppression PIR/Day sense
• Switching of fixtures based on human motion
• The sensitivity and holding time can be adjusted
• Detecting Range: Approx. 7-10 meters
• Detecting Angle: 120 degrees
• Working Temperature: up to +60°C
• Easy to install and simple to use
• Load supported: Energy-saving lamps, Bulb (Incandescent lamps), electronic fluorescent lamps, spotlights, etc., and such other kinds of lamps up to 400W
• Better Design for Heat Dissipation and Waterproof

Technical Specifications:

• Type: Motion detector
• Voltage: 230-240 V / 50 Hz
• Detector type: Passive infrared
• Application: Indoors and outdoors
• Installation: Wall / Ceiling
• Max. Output (Resistive Load, Incandescent Lamp): 400 W
• Detection Angle: 120°
• Reach: 7 to 10-meter max.
• Time Setting: 8 sec. - 35 min.
• Dimensions (H x W x D): 106 x 42 x 32 mm

Package Includes:

• 1 x AS-20 Automatic Switch (No Retail Packing, Simple Bubble Wrapping)
• 1 x Detailed Installation Instructions with Diagram